Hexagon Conveyor

The innovative Hexagon Conveyor is specially designed to efficiently transport flowing bulk materials with highest demands regarding low residue and cross contamination in combination with high capacity.
The Hexagon Conveyor comes in two sizes, with the larger one capable of handling around 190 m³ per hour. Both types of conveyors can be constructed with a maximum length of 55 meters.

Features

• Fully enclosed design
• Notable blue cleaning flight, every 3 meters
• Geared drive units with flexible coupling
• Guide strip (C45) on the intermediate floor
• Drop forged chain
• Sprocket with interchangeable Hardox® teeth segments
• Product overflow detection
• Speed sensor
• Chain tensioning system
• Primer and paint finish
• Low residu bottom section*
• Low residu recirculation system at the drive*
• Low residu tension side*
• Inclination up to 35 degrees (with reduced capacity)
• Transport on intermediate section (up to 4-10 m depends on product)
• Very suitable by multiple outlets

Special Executions

• All-weather execution
• ATEX 22 Zone drive unit
• Intermediate outlet slides
• Spotfilter
• Executed in AISI 304
• Executed in galvanized S235 steel

_{* Example 1: a 20 m long conveyor will only contain 0,05 Liter (!) of non-sticky powder after a full cleaning cycle of 40 m.
Example 2: even ten times less based on finished product size 6 mm or bigger.}

Receive more information